Drawing Machine Major auxiliary equipment

SW600 Descaling machines:

Type	Range
Nominal diameter of the descaling reel	ø600mm
Speed of the descaling reel	80rpm
Linear speed of descaling	150m/min
Max. diameter of the wire rod	ø8mm

Fz Pointing machine             Tip-rolling machine

Type	Pointing Range
Fz-3	ø3-0.84mm
Fz-6	ø6.5-1mm
Fz-10	ø10-3mm
Fz-16	ø16-3mm

UN Butt-welding machine

Type	Weld Range			Power
UN-3	Copper	ø0.8-ø2	lron	ø0.8-ø3	5kw
UN-5	Copper	ø0.8-ø3	lron	ø1-ø4	5kw
UN-10	铜Copper	ø4	lron	ø2-ø6.5	10kw
UN-15	Copper	ø6	lron	ø4-ø10	15kw
UN-40	Copper	ø8	lron	ø10-ø20	40kw

Discharging machine

Name	Unit	hoist 500kg	hoist 350kg
Max hoisting capacity	kg	500	350
Lift	mm	2650	2500
Lifting Speed	m/min	8	6.4
Boom over handing	mm	1230	1085
Motor Power	kw	2.2	1.1
Total weight	kg	600	300

Automatic horizontal wire-collecting machine

Diameter of fixed-type block	550mm
Discharging material	0b≤80kgf/mm2
Discharging diameter	1.5-2.5mm
Discharging speed	Vmax≤500ml/min
Motor	11-15kw
Center height for operation	1300mm
Discharging weight	500kg
Total weight of equipment (approx)	2750kg

Thermo-zinc plating take-up machine：

Number diameter of block	12-24/400-600
Length of take up block	900mm
Diameter of wire to be taken up	4-1.5mm
Take up speed of block	5.5-29.6m/min
Take up weight of block	150-200kg
Center height of the block	450mm
Distance between center of block	900mm
Center height of feed regulating wheel	2000mm
Moter	11-30kw
Total weight of equipment (approx)	12000kg

Type	G192	G165
Volume	15	11
Productivity	25m/min	25m/min
Max Wire Feed Spec	150Square mm	60Square mm