Nail-making machine’s auxiliary
Directions (application):
The water-tank series wire-drawing machine is in wet type to draw low-, mid-, and high-carbon steel wires,as well as non-ferrous. With swift speed, high quality and good reputation, it's the most ideal equipment for steel wires and ropes, galvanized wires, and electric wires manufaturers.

• 2M6-6 Cutting tool grinder
• SD-400 Nail Polishing
• Wire-laying frame

Model	Units	SD-400	SD-600	SD-700	SD-1000	SD-2000
Capacity	kg	400	600	700	1000	2000
Motor power	kw	3-4	4.5-5.5	5.5-7.5	5.5-7.5	11-15
Overall size	mm	1640x900 x1000	1800x1000 x1100	1900x1050 x1200	2000x1500 x1400	2500x1500 x1600

Note:For special steel wire process machines and other auxiliary equipment, the custom-made service be made to buyer's requirements.




ZL-A Wire Nail Alignment Packing Feeder
This machines, as a new generation of wire nail packing nuit, is applied to the assistance of nail packing. The wire nails can be trimly packed into cartons, which not only reduces the labour intensity of operators, increases the productivity but lessen the packing volume as well as the cost of packing materials.

JD100 Automatic Coil Nail Welder
This coil nail welder is automatic welding equipment. The nail set in the vibrating feeder are aligned in orderly way under vibration. Through a feeding track, it slides into welding wires to form collated nails. After that, the collated nail strip goes through automatic oil dipping and rust proof unit, drying & counter device, and next are rolled into coil nail (in flat or cone forms). The coil nails are cut off according to a set number of nails, and each coil is finally bound with a rubber band and packed into cartons by operators.
This equipment adopts such high-tech parts as the PLC of Mitsubishi make, Japan and the touch type display of DIGITAL formula, etc., which conduct an automatic test on process flows like lack of raw materials, nail's skip, counting and cutting, etc. These high-tech components cause the whole system to act accurately, reliably and make the product quality steady.

Nail Polishing Machine

Nail Cutter Die Grinder